• phone Call Us: 1300 884 456
  • How to clean the adhesive closures on your BioMagnetic Support

    Have you had your BioMagnetic support for a while and you're finding that the adhesive closures aren't sticking anymore


    This is usually caused by a build-up of lint and debris getting stuck in the adhesive. There is a simple fix for this to get your support working once again. 
     
    Step 1: Store your support correctly. The first thing to note here is the best way to deal with this is to prevent it from happening in the first place. Avoid leaving your support open when not in use. If the adhesive side is left out it may stick to other fabrics, picking up lint and thread. When not in use, close the support like you are wearing it so that the adhesive is attached to the neoprene.
     
    Step 2: Grab some sticky tape. We use gaffa tape or duct tape as it is the most sticky. Loop it around your fingers as shown in the video and then start dabbing the adhesive side with the build-up. Continue this until you have removed everything you can. It might take a few pieces of tape. 
     
    Step 3: Any stubborn debris that doesn't want to come out can be removed with tweezers. If you suffer from arthritis in your hands we know this could be difficult so please ask a friend or loved one to help. 
     
    Step 4: Use your BioMagnetic Support once again!